This site is designed to calculate shipping for ONLY orders to the US, Australia, Canada, New Zealand, United Kingdom & Ireland ONLY. Shipping charges are reviewed as they are packed so if we find a slightly less expensive charge we will refund the difference.
Any Duty Fees are the responsibilty of the purchaser and not our responsibility!
All other Countries must use the "Contact Form" and I will calculate your order manually and email a PayPal invoice
SPECIAL NOTES:
Due to medical issues that impact production, some items are currently diasbled. You can email for more information or to place a manual order.
These leads fit the RD4000, RD7000, RD8000 & RD8100
These lead sets are 10 Foot PER lead and overall about 20 Ft when the leads are spread.
$55.00 USD + shipping
These leads fit older Radio Detection units that use the 3 pin connector & most 3 Pin Metro & Vivax Straight Leads and most any transmitter using the 3 Pin XLR Cable.
These lead sets are 10 Foot PER lead and overall about 20 Ft when the leads are spread.
$45.00 USD + shipping
These "Coily Cord" type leads fit the RD400STX/RD433HCTx2 & most 3 Pin Metro & Vivax Straight Leads using the XLR Type Plug
$80.00 USD + shipping
These "Coily Cord" type leads fit the RD4000, RD7000, RD8000 & RD8100. When new they are approximately 18" retracted and each lead expands to just over 7 ft for a total spread of 14-15 ft.
In stock as of 11/10/23 and no longer Back-Ordered
$90.00 USD + shipping
These leads fit the RD400LCTx that use the 1/4 in standard Mono Phone plug Connector lead sets. They also work with most units that use the 1/4" Male Phone Plug connector
These lead sets are 10 Foot PER lead and overall about 20 Ft when the leads are spread.
$43.00 USD + shipping
This is a small spool with 20 Ft of 20 awg 26/36 stranded, High Flex Tinned Copper Wire with (1) Heavy Duty Banana Plug & (1) insulated Crocodile Clip.
Currently Not Available
These leads fit the Subsite 910/950/970 Series and are 10 Ft straight leads
These lead sets are 10 Foot PER lead and overall about 20 Ft when the leads are spread.
These will NOT work on Rycom
$90.00 USD + shipping
These "Coily Cord" type leads fit the Subsite 910/950/970 Series. When new they are approximately 18" retracted and each lead expands to just over 7 ft for a total spread of 14-15 Ft.
These will NOT work on Rycom
$112.50 USD + shipping
These "Coily Cord" type leads fit the Ditch Witch / Subsite 830T. When new they are approximately 18" retracted and each lead expands to just over 7 ft for a total spread of 14-15 Ft..
$90.00 USD + shipping
These leads fit the Ditch Witch / Subsite 830T and are 10 Ft straight leads
These lead sets are 10 Foot PER lead and overall about 20 Ft when the leads are spread.
$45.00 USD + shipping
These leads fit the Metrotech 9890 and are 10 Ft straight leads
These lead sets are 10 Foot PER lead and overall about 20 Ft when the leads are spread.
$37.50 USD + shipping
These "Coily Cord" type leads fit the Pipehorn 800 Series. They are approximately 18" retracted and each lead expands to just over 7 ft for a total spread of 14-15 Ft. They also work with any transmitter that uses a 1/4" Mono Phone plug connector
$82.00 USD + shipping
These leads fit the Dynatel 2250 and are 10 Ft straight leads with a Metal Right Angle 1/4" Stereo Phone plug connector
These lead sets are 10 Foot PER lead and overall about 20 Ft when the leads are spread.
$50.00 USD + shipping
These leads fit the Subsite 75T and are 10 Ft straight leads with a Metal Right Angle 1/4" Stereo Phone plug connector
These lead sets are 10 Foot PER lead and overall about 20 Ft when the leads are spread.
$45.00 USD + shipping
These "Coily Cord" type leads fit the Subsite 75T using a Right Angle 1/4" Stereo Phone plug. They are approximately 18" retracted and each lead expands to just over 7 ft for a total spread of 14-15 Ft.
$90.00 USD + shipping
These lead sets fit the Radio Detection RD4000, RD7000, RD7100, RD8000 & the RD8100 and use the 8 pin plug.
The Heavy Duty * RD lead set I sell is is 10 ft per lead or a useable distance of about 19 ft when spread apart, (6" is kept together near the connector end for an additional strain relief) and are ready to plug in and use.
I use I use the Original OEM Round metal RD equipment plug, NOT the new square plastic plug & the OEM insulated Crocodile clips, the lead wire is High Quality, Heavy Duty, 16 awg kinkless, vinyl coated, stranded 65/34 tinned copper wire, resistant to chemical corrosion and fungus.
Tinned, copper lead wire is important as when the insulation gets cut the leads wires get moisture and untinned copper stranded wire can get brittle and break.
Priced at $55.00 USD plus shipping.
* Please Note: the factory leads supplied from Radio Dectection and others are 18 awg or 20 awg wire with thick insulation but the wire is a smaller diameter than the Heavy Duty 16 awg wire I use for my for my straight lead sets.
These leads fit old Radio Detection units that use the 3-Pin Connector lead sets, also in a 10 ft per lead or a useable distance of 19 ft when spread apart, (6" to 1 ft is kept together near the connector end for strain relief).
Priced at $45.00 USD plus shipping.
These leads fit the old RD400STX/RD433HCTx2 units that use the 3-Pin Connector.
These leads also fit many of the Metrotech & Vivax units that use the 3 pin connector like the newer VM-810. The leads are about 18" when retracted and about 7 ft + when extended giving an overall spread of about 14-15 ft. I use a thicker insulated cable which does not fit into the connector so there is a splice at the connector end to a wire gauge that fits into the connector. Like all "coily cord" type leads, they should not be overextended too much from their rated length.
5 Set Max
Priced at $80.00 USD plus shipping.
These lead sets fit the Radio Detection RD4000, RD7000, RD7100, RD8000 & the RD8100 and use the 8 pin plug.
I use I use the Original OEM Round metal RD equipment plug, NOT the new square plastic plug & the OEM insulated Crocodile clips, the lead wire is High Quality 18 awg, kinkless 41/36 stranded copper wire with rubber insulation. The leads are about 18" when retracted and about 7 ft + when extended giving an overall spread of about 14-15 ft. I use a thicker insulated cable which does not fit into the RD connector so there is a splice at the connector end to a wire gauge that fits into the connector. Like all "coily cord" type leads, they should not be overextended too much from their rated length.
5 Set Max
Priced at $90.00 USD plus shipping.
These leads fit the RD400LCTx and use the 1/4 in standard Mono Phone plug Connector lead sets, also in a 10 ft per lead or a useable distance of 19 ft when spread apart, (6" to 1 ft is kept together near the connector end for strain relief).
These leads also fit other brand transmitters that use the 1/4" Mono Phone Plug connector like the older style Metrotech 810, Pipehorn 800 Series, Vivax & the Dynatel 2273.
Priced at $43.00 USD plus shipping.
This is a small spool with 20 Ft of 20 awg 26/36 stranded, High Flex Tinned Copper Wire with (1) Heavy Duty Banana Plug & (1) insulated Crocodile Clip
This is perfect for the situations where your leads aren't quite long enough to complete your circuit.
The spools have removable, snap around sleeves so when you wind it back up & snap on the sleeve, the wire will stay on the spool in your equipment bag.
The size is about 2-1/2" wide including the dowel by approximately 2-3/4" diameter
CURRENTLY UNAVAILABLE
These are the 6 pin Subsite straight leads for the 910/950/970 series, 10 ft per lead or a useable distance of 19 ft when spread apart, (6" to 8" is kept together near the connector end for an additional strain relief).
I use the Radio Detection (RD) style OEM insulated Crocodile clips on the ends.
These will NOT work on Rycom
Priced at $90.00 USD plus shipping.
These are the 6 pin Subsite leads for the 910/950/970 series in a "Coily Cord" kinkless Lead Set about 18" retracted and about 7 ft extended, (about 14-15 ft spread when both leads extended), rubber insulation, 18 awg.
I use a thicker insulated cable which does not fit into the Subsite connector so there is a splice at the connector end to a wire gauge that fits into the connector. Like all "coily cord" type leads, they should not be overextended too much from their rated length.
I use the Radio Detection (RD) style OEM insulated Crocodile clips on the ends.
These will NOT work on Rycom
5 Set Max
Priced at $112.50 USD plus shipping.
These are leads for the Ditch Witch / Subsite 830T in a "Coily Cord" kinkless Lead Set about 18" retracted and about 7 ft extended, (about 14-15 ft spread when both leads extended), rubber insulation, 18 awg.
I use a thicker insulated cable which does not fit into the Subsite connector so there is a splice at the connector end to a wire gauge that fits into the connector. Like all "coily cord" type leads, they should not be overextended too much from their rated length.
I use the Radio Detection (RD) style OEM insulated Crocodile clips on the ends.
5 Set Max
Priced at $90.00 USD plus shipping.
Ordering currently disabled
These are straight leads for the Ditch Witch / Subsite 830T, 10 ft per lead or a useable distance of 19 ft when spread apart, (6" to 8" is kept together near the connector end for an additional strain relief).
I use the Radio Detection (RD) style OEM insulated Crocodile clips on the ends.
Priced at $45.00 USD plus shipping.
Ordering currently disabled
These are straight leads for the Metrotech 9890, 10 ft per lead or a useable distance of 19 ft when spread apart, (6" to 8" is kept together near the connector end for an additional strain relief).
These are Insulated Banana Plugs to Radio Detection (RD) style OEM insulated Crocodile clips on the ends.
Priced at $37.50 USD plus shipping.
Ordering currently disabled
These fit the Pipehorn 800 series in a "Coily Cord" kinkless Lead Set about 18" retracted and about 7 ft extended, (about 14-16 ft spread when both leads extended), rubber insulation, 18 awg.
These leads also fit all transmitters that use the 1/4" mono phone plug like the Radio Detection RD400LCTx, certain Vivax/Metrotech, the Pipehorn 800 series & the Dynatel 2273.
I have changed to a thicker insulated cable which does not fit into the Subsite connector so there is a splice at the connector end to a wire gauge that fits into the connector. Like all "coily cord" type leads, they should not be overextended too much from their rated length.
I use the Radio Detection (RD) style OEM insulated Crocodile clips on the ends.
These Leads Sets are made to order. Please allow 1-2 days
Priced at $82.00 USD plus shipping.
Ordering currently disabled
These are straight leads for the Dynatel 2250, 10 ft per lead or a useable distance of 19 ft when spread apart, (6" to 8" is kept together near the connector end for an additional strain relief).
These leads also fit all transmitters that use a metal right angle 1/4" stereo phone plug.
I use the Radio Detection (RD) style OEM insulated Crocodile clips on the ends. These leads will read reverse in Fault Find mode
Priced at $50.00 USD plus shipping.
Ordering currently disabled
These are straight leads for the Subsite 75T, 10 ft per lead or a useable distance of 19 ft when spread apart, (6" to 8" is kept together near the connector end for an additional strain relief).
These leads fit the Subsite 75T transmitters that use a metal right angle 1/4" stereo phone plug.
I use the Radio Detection (RD) style OEM insulated Crocodile clips on the ends.
Priced at $45.00 USD plus shipping.
Ordering currently disabled
These fit the Subsite 75T in a "Coily Cord" kinkless Lead Set about 18" retracted and about 7 ft extended, (about 14-16 ft spread when both leads extended), rubber insulation, 18 awg.
These leads fit all Subsite 75T transmitters that use the Right Angle 1/4" Stereo phone plug.
I have changed to a thicker insulated cable which does not fit into the Subsite connector so there is a splice at the connector end to a wire gauge that fits into the connector. Like all "coily cord" type leads, they should not be overextended too much from their rated length.
I use the Radio Detection (RD) style OEM insulated Crocodile clips on the ends.
Priced at $90.00 USD plus shipping.
Ordering currently disabled
As a former locate technician, I have had to deal with the inevitable lead or clamp failure.
Unfortunately it's a matter of "when" not "if" they will fail in our line of work.
I wasn't happy with the construction and durability of the factory leads so I designed my own set using a higher quality and larger gauge wire and different assemby tecniques.
After making some for associates, I started Rdleads.com in 2013 and have expanded from just leads for the Radio Detection RD 8000 to leads for older Radio Detection products, Ditch Witch 830T, certain Metrotech products, certain Vivax products and for the Subsite 910/950.
$9.00 Ea
$2.75 Ea
$1.50 Ea
$1.50 Ea
I have added some Utility Informational & Training videos on my 
channel. They are a very good source of information on various techniques that you may not know and they are in no particular order or an endorsement for any Company or Product Brand based on the videos listed. Just click the link below:
© 2018 RdLeads.com. All Rights Reserved.
RdLeads.com is not affiliated with Ditch Witch, Metrotech, Radio Detection, SPX, SubSite or Vivax which are registered trademarks of each respective Company.